Skip to main content


Fig. 4 | Journal of Analytical Science and Technology

Fig. 4

From: Determination of copper(II) by flame atomic absorption spectrometry after its perconcentration by a highly selective and environmentally friendly dispersive liquid–liquid microextraction technique

Fig. 4

Effect of disperser solvent on the extraction of Cu(II) ions by DLLME method. Conditions: sample volume, 10.0 mL; Cu(II), 50.0 μg L−1, solution pH = 2.0; salophen, 2.0 × 10−5 M; disperser solvent (acetone) volume, 1.30 mL; diluting solvent (ethanol) volume, 120 μL; centrifuge time, 5 min (at 5000 rpm)

Back to article page